Configuring Whether The Generator Will Output Local Time Or Utc Time In Time/Date Modes; Reader Functions; Configuring Whether The 8010-Sie Will Use Ltc Or Vitc From The Vtr In Vtr Source Id Mode - evertz 8010-SIE Instruction Manual

Digital source id encoders
Table of Contents

Advertisement

3.5.10. Configuring Whether the Generator will Output Local Time
or UTC Time in Time/Date Modes
GEN TZ ADJUST
Gtm zone adj utc
Gtm zone adj loc
3.6.

READER FUNCTIONS

3.6.1. Configuring Whether the 8010-SIE Will Use LTC or VITC
from the VTR in VTR Source ID mode
RDR ASSIGNMENT
Rass auto
Rass *ltc* vitc
Rass ltc *vitc*
OPERATION
Model 8010-SIE Digital Source ID Encoder Manual
When the GEN SRC ID MODE is set to GPS SID, the generator
internal time clock runs in Universal Coordinated Time (UTC). The
GEN TZ ADJUST menu item is used to select whether the Generator
will output UTC or UTC adjusted by the programmed Time Zone Offset
(Local Time).
The local time will also be adjusted by the daylight
savings time adjustment if daylight savings time is in effect.
section 3.9.5 for a discussion of daylight savings time features of the
8010-SIE-GPS II.
Select Gtm zone adj utc to configure the generator to output its time as
UTC
Select Gtm zone adj loc to configure the generator to output its time as
UTC adjusted by the programmed Time Zone Offset and Daylight
saving adjustment if DST Time is On.(Local Time)
The RDR ASSIGNMENT menu is used to select whether the LTC or
VITC the reader will be used in the RDR SID, RDR LVS modes. This
menu item also determines whether the 8010-SIE will use the LTC or
VITC from the VTR in VTR SID mode. The reader that is active will
have an asterisk (*) displayed beside its name on the front panel
display. The reader data from the inactive reader will still be visible from
the front panel and VCG windows but will have no effect on the
generator time in the RDR SID, RDR LVS modes.
Select Rass auto to configure the reader to automatically switch
between Linear Time Code (LTC) and Vertical Interval Time Code
(VITC) reading. The reader can be set to recover VITC from a specific
range of video lines.
Select Rass *ltc* vitc to configure the Linear Time Code (LTC) as the
active reader.
Select Rass ltc *vitc* to configure the Vertical Interval Time Code
(VITC) as the active reader.
Revision 2.2
See
Page 3-14

Advertisement

Table of Contents
loading

This manual is also suitable for:

8010-sie-gpsii

Table of Contents