Configuring Whether The Generator Will Output Local Time Or Utc Time In Time/Date Modes - evertz 8010TM Instruction Manual

3.4.16. Configuring Whether the Generator will Output Local Time
or UTC Time in Time/Date Modes
GEN TIME ZONE ADJ
Gtm zone adj utc
Gtm zone adj loc
OPERATION
Model 8010TM SDI Time Code Master Manual
When the GEN MODE is set to TIME DATE, the generator internal time
clock runs in Universal
GEN TIME ZONE ADJ menu item is used to select whether the
Generator will output UTC or UTC adjusted by the programmed Time
Zone Offset (Local Time). The local time will also be adjusted by the
daylight savings time adjustment if daylight savings time is in effect.
See section 3.4.8 for a discussion of daylight saving time features of
the 8010TM.
Select Gtm zone adj utc to configure the generator to output its time as
UTC.
Select Gtm zone adj loc to configure the generator to output its time as
UTC adjusted by the programmed Time Zone Offset and Daylight
saving adjustment if DST Time is On. (Local Time)
Revision 1.5.1
Coordinated Time (UTC). The
Page 3-19