Patch Delete; Patch Install - H3C S5120-EI Series Command Reference Manual

Description
Use the patch deactive command to stop running the specified patch and all the ACTIVE patches after the
specified patch, and the system will run at the original software version.
NOTE:
• All the ACTIVE patches (including the specified patch) turn to the DEACTIVE state.
This command is not applicable to the patches in the RUNNING state.
•
Examples
# Stop running patch 3 and all the ACTIVE patches after patch 3 on the device with member ID of 1.
<Sysname> system-view
[Sysname] patch deactive 3 slot 1

patch delete

Syntax
patch delete patch-number slot slot-number
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch, with values depending on the patch file used.
slot slot-number: Specifies the ID of a member switch of the current IRF virtual device.
Description
Use the patch delete command to delete the specified patch and all the patches after the specified patch.
NOTE:
This command only removes the patches from the memory patch area, and it does not delete them from the
storage media. The patches are in the IDLE state after execution of this command.
Examples
# Delete patch 3 and all the patches after patch 3 on the device with member ID being 1.
<Sysname> system-view
[Sysname] patch delete 3 slot 1

patch install

Syntax
patch install patch-location
undo patch install
View
System view
118