Deviser S7200 User Manual page 76

Part II: Settings and Measurements
Record Playback
When you have recorded the transport stream successfully, you can use the S7200 to review the recording.
Press the button and tap the top key repeatedly until TS is displayed. (Note that only files saved to the
SSD, not to a separate USB drive, are shown here.)
In order to play back saved transport stream files, ensure that the TS input is set to DISK. Configure this
setting from the TS menu; see below, right.
When finished, press the button and open the transport stream analysis function. Tap DISK and choose
your desired file from either the SATA SSD or USB file list. The program will read the TS file, after which the text
"Analysis finished!" will appear.
76