Chapter 15: Saving Data; Screenshots; Measurement Data - Deviser S7200 User Manual

Chapter 15: Saving Data

The ability to save and manipulate data is a key feature of using the S7200 TV Signal Analyzer. From the Save
dialog– accessible by pressing the Save (
current display, record detailed tables of measurement data, or generate printable work orders with the
click of a button. Saved files are automatically stored in the system's 1GB internal hard drive. At maximum
capacity, this drive will hold approximately 2,000 saved screenshots and setup files.
Once saved, files be renamed, moved, or deleted as the user wishes. See Chapter 14: File Management for
detailed instructions.
15-1

Screenshots

You can save nearly any moment of S7200 operation to
an image, including tests, menu navigation, data tables,
system settings pages, file management, and more.
Simply press the Save key to open a dialog (shown right).
If prompted, tap to select PICTURE.
Use the touchscreen keypad to input a filename. (See
Section 2-5 for control instructions.) You may also check
the Filename Watermark box; this imprints the captured
image with its own filename, helping to easily identify the
image afterward. Finally, tap Save to confirm.
15-2

Measurement Data

Saving measurement data is much like saving an image.
Just press Save while a S7200 measurement application is
active, then tap DATA when prompted.
Saved data includes all measurement information
available: test parameters, system serial number and
software info, the time and date (remember to set the
system clock in Setup – see subsection 13-2.3), and even
individual data points.
) key under the display – you can create screenshots of the
Part IV: System Functions
145