Deviser S7000 Operation Manual
  1. Manuals
  2. Brands
  3. Deviser Manuals
  4. Measuring Instruments
  5. S7000 Series
  6. Operation manual

Deviser S7000 Operation Manual

Tv analyzer
Hide thumbs Also See for S7000:
Table of Contents

Advertisement

Quick Links

Download this manual
S7000 TV Analyzer
Operation
Ver
Ver
Ver
Ver 1.0
© © © © TianJin
TianJin
TianJin Deviser
TianJin
Deviser
Deviser
Deviser Electronics
Electronics
Electronics
Electronics Instrument
Deviser
Part
Deviser
Deviser
Deviser Part
Part
Part No.:
All
All
rights
rights
All
All rights
rights reserved.
Printed
Printed
Printed in in in in CHINA.
Printed
Manual
1.0
1.0
1.0
Instrument
Instrument
Instrument Co.,
No.:
DK11820NA7300
No.: DK11820NA7300
No.:
DK11820NA7300
DK11820NA7300
reserved.
reserved.
reserved.
CHINA.
CHINA.
CHINA.
Co., Ltd.
Co.,
Co.,
Ltd.
Ltd.
Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S7000 and is the answer not in the manual?

Questions and answers

Related Manuals for Deviser S7000

Summary of Contents for Deviser S7000

  • Page 1 S7000 TV Analyzer Operation Manual Ver 1.0 © © © © TianJin TianJin TianJin TianJin Deviser Deviser Deviser Deviser Electronics Electronics Electronics Electronics Instrument Instrument Instrument Instrument Co., Co., Co., Co., Ltd. Ltd. Ltd. Ltd. Deviser Part No.: DK11820NA7300 Deviser...
  • Page 3 1.1.3 How the manual is organized......................2 1.1.4 ESC(Electrostatic Discharge)......................3 Getting Started............................4 1.2.1 Overview............................4 1.2.2 Shipping Inspection..........................4 1.2.3 Accessories............................4 Getting to know S7000..........................5 1.3.1 Front Panel............................5 1.3.1.1 Indicator..........................5 1.3.1.2 Keyboard........................... 5 1.3.1.3 Title Bar..........................6 1.3.2 Left Panel............................6 1.3.3...
  • Page 4 S7000 TV Analyzer Operation Manual 2.1.5 Channel Settings..........................21 2.1.5.1 Select User Channel Plan....................21 2.1.5.2 Learn User Channel Plan....................21 2.1.5.3 Edit User Channel Plan....................23 2.1.5.4 Edit Tilt Plan........................24 2.1.5.5 Satellite List........................24 2.1.5.6 Adding Satellite....................... 26 2.1.6 INTERFACE............................ 26 2.1.6.1 LNB Power........................

  • Page 5: Table Of Contents

    S7000 TV Analyzer Operation Manual 3.2.2 DVB-T/H............................45 3.2.2.1 Parameter.........................46 3.2.2.2 Operation......................... 46 3.2.3 DVB-T2............................48 3.2.3.1 Parameter.........................49 3.2.3.2 Operation......................... 49 Spectrum..............................51 3.3.1 Parameter............................51 3.3.2 Operation............................52 Channel Scan............................56 3.4.1 Parameter............................56 3.4.2 Operation............................56 Tilt measurement............................58 3.5.1 Operation............................58 CNR---ANALOG TV..........................60 3.6.1 Parameter............................60 3.6.2 Operation............................60...
  • Page 6 S7000 TV Analyzer Operation Manual DISH................................ 82 4.4.1 Operation............................83 DiSEqC..............................85 4.5.1 Parameters............................85 4.5.2 Operation............................86 TS Monitor & Analysis............................ 88 Brief introduction............................. 89 5.1.1 Application range..........................89 5.1.2 Standards............................89 RealTime Decoder............................90 5.2.1 Description............................90 5.2.2 Operation............................91 Channel Edit............................. 92 5.3.1...
  • Page 7 S7000 TV Analyzer Operation Manual 5.11.1 Description............................. 105 5.11.2 Operation............................105 5.12 PSI/SI..............................106 5.12.1 Description............................. 106 5.12.2 Operation............................106 5.13 Capture..............................107 5.13.1 Description............................. 107 5.13.2 Operation............................107 5.14 Parameter Setting........................... 109 5.14.1 Description............................. 109 File Management............................110 Picture File..............................111 6.1.1 Operation............................111 Data File..............................
  • Page 9 S7000 TV Analyzer Operation Manual 1 1 1 1 The Basics The Basics Basics Basics ● General Information ● Getting started ● Getting to know S7000...
  • Page 10 Deviser shall have no responsibility for any defect or damage caused by improper use and maintenance or for any product which has been repaired or altered by any one others not DEVISER or our authorized service center.
  • Page 11 S7000 TV Analyzer Operation Manual � Section Section Section 6 6 6 6 : : : : File File File Management- Management- Section File Management- Management- provides file management, including: picture and data view, delete, transfer, rename and so on.
  • Page 12 Getting Started Started 1.2.1 1.2.1 1.2.1 1.2.1 Overview Overview Overview Overview S7000 is a versatile TV analyzer which supports DVB-C/S/S2/T/T2/VSB standard digital TV analysis, MPEG1/2/4, H.264 Video Record, TS analysis and spectrum analysis. 1.2.2 1.2.2 Shipping Shipping Inspection Inspection 1.2.2 1.2.2 Shipping...
  • Page 13 S7000 TV Analyzer Operation Manual Getting Getting to to to to know know S7000 1.3 Getting Getting know know S7000 S7000 S7000 1.3.1 1.3.1 Front Front Panel Panel 1.3.1 1.3.1 Front Front Panel Panel 8 9 6 15 13 12 Figure 1-1 TFT LCD: 7”, Resolution: 800×480.
  • Page 14 S7000 TV Analyzer Operation Manual 12) ESC ESC key, this key is used to escape from the current function/view or return to function/view. 13) TAB TAB key, this key is used to switch marker. DOWN LEFT RIGHT 14) UP UP key, DOWN...
  • Page 15 S7000 TV Analyzer Operation Manual 1.3.3 1.3.3 1.3.3 1.3.3 Right Right Right Right Panel Panel Panel Panel Charge socket HDMI Figure 1-4 1.3.4 1.3.4 Rear Rear Panel Panel 1.3.4 1.3.4 Rear Rear Panel Panel CI Card Horn Battery TS-ASI output TS-ASI input...
  • Page 16 1.3.5.1 Battery Battery S7000 use built-in 7.4V/13AH Li-Polymer battery and work over 5 hours when fully charged. Once the voltage of the battery is lower than 6.2 V, the battery icon flashes in screen and the instrument will shut down automatically after 10 seconds.
  • Page 17 S7000 TV Analyzer Operation Manual 2 2 2 2 Setup Setup Setup Setup ● System Setup ● Channel Information Setup...
  • Page 18 S7000 TV Analyzer Operation Manual Setup 2.1 Setup Setup Setup 2.1.1 2.1.1 Overview Overview 2.1.1 2.1.1 Overview Overview The instrument enables you to select from numerous instrument setup and utility functions. This chapter will provide you with instructions on how to utilize the functions available in the Setup Menus of the instrument.
  • Page 19 S7000 TV Analyzer Operation Manual Figure 2-2 2.1.3 2.1.3 General General Settings Settings 2.1.3 2.1.3 General General Settings Settings Select the GENERAL GENERAL GENERAL GENERAL Tab to display and adjust the general system settings. The following settings are included in the GENERAL...
  • Page 20 S7000 TV Analyzer Operation Manual Figure 2-3 � Manual Network Settings: To enable manual network parameters, perform the following steps: While the DHCP check is not selected, select key (TAB TAB) keys DOWN DOWN LEFT LEFT RIGHT RIGHT UP/DOWN DOWN/LEFT LEFT/RIGHT RIGHT) to highlight the first segment of the IP ADDR field.
  • Page 21 Off Settings Settings Settings Settings To save battery power, S7000 can be set to shut-off automatically when it is inactive for 3 minutes, 5 minutes, 10 minutes or 30 minutes as shown in the Figure 2-6. If the NEVER NEVER NEVER NEVER option is selected, the unit will not shut-off automatically.
  • Page 22 S7000 TV Analyzer Operation Manual Figure 2-7 DOWN DOWN LEFT LEFT RIGHT RIGHT ENTER ENTER Select keys (UP UP/DOWN DOWN/LEFT LEFT/RIGHT RIGHT) and key (ENTER ENTER) to adjust the local date and time.
  • Page 23 2.1.3.5 Language Language Settings Settings The Language Settings allows the user to set the system language as shown in the Figure 2-9. After the language is selected, S7000 will transform menus to the selected language automatically. Figure 2-9 NOTE: NOTE:...
  • Page 24 Manual 2.1.3.6 2.1.3.6 Operator Operator Name Name 2.1.3.6 2.1.3.6 Operator Operator Name Name The operator name and company can be entered into S7000 as shown in the Figure 2-10. DOWN DOWN LEFT LEFT RIGHT RIGHT ENTER ENTER Select keys (UP...
  • Page 25 RIGHT), key (ENTER ENTER) and the Alphanumeric Keypad to enter a Level Shift value from -3dB to +3dB. Figure 2-12 Also, S7000 allows the user to select the desired measure level unit dBμV, dBmV, or dBm as the Figure 2-13.
  • Page 26 2.1.4.3 ANALOG ANALOG ANALOG ANALOG TV TV Limit Limit Limit Limit Settings Settings Settings Settings S7000 allows the user to set test ANALOG TV limits to their desired level. Select keys (UP UP/DOWN DOWN DOWN DOWN/LEFT LEFT LEFT LEFT/RIGHT RIGHT...
  • Page 27 Figure 2-14 2.1.4.8 2.1.4.8 2.1.4.8 2.1.4.8 Digital Digital Digital Digital TV TV Mode Mode Mode Mode S7000 supports two different digital TV modes: ATSC and DVB, as shown in the Figure 2-15. This function will be used in TS Measurement.
  • Page 28 S7000 TV Analyzer Operation Manual Figure 2-15...
  • Page 29 Plan Plan Before attempting to use S7000, the user must create a User Channel Plan. Once completed, this will allows S7000 to measure all the channels automatically and save the various measurement data. Perform the following steps to learn a User Channel Plan: Connect S7000 to the cable system.
  • Page 30 RIGHT) to highlight the START START Button. Select key (ENTER ENTER ENTER ENTER) to start learning the user channel plan. When the learning process is completed, S7000 will automatically save the settings to the active user channel plan. Figure 2-17...
  • Page 31 (ENTER ENTER ENTER ENTER) to edit each individual channel. Select SELECT SELECT SELECT SELECT, S7000 will display the interface of ENABLE ENABLE Channel information and the user can enable the channel (See Section 2.2). Select ENABLE ENABLE ALL ALL, all the channels are enabled.
  • Page 32 Satellite List List List List Before attempting to use the SATELLITE function in S7000, user must edit the desired satellite list. Once completed, this will allow S7000 to measure all the satellites automatically and save the various measurement data. Select...
  • Page 33 S7000 TV Analyzer Operation Manual Figure 2-21 Press key (ESC ESC) to exist, one dialog box will appear: Are you sure to save the changes? Select “YES” to save and “NO” to exit without saving. NOTE: NOTE: In In In In dish...
  • Page 34 2.1.5.6 2.1.5.6 Adding Adding Satellite Satellite 2.1.5.6 2.1.5.6 Adding Adding Satellite Satellite S7000 allows the user to add the desired satellite to the list, as shown in the Figure 2-22. DOWN DOWN LEFT LEFT RIGHT RIGHT ENTER ENTER Select keys (UP...
  • Page 35 S7000 TV Analyzer Operation Manual Figure 2-23...
  • Page 36 2.1.6.3 GPS When the external GPS is not connected, S7000 allows the user to configure GPS manually to calculate installation angle of the dish, when the external GPS is not connected with S7000, as shown in the Figure 2-26. When the external GPS is connected, icons will appear on the main title and S7000 will position automatically.
  • Page 37 S7000 TV Analyzer Operation Manual Figure 2-26 Figure 2-27...
  • Page 38 2.2.1 Brief Brief Brief Brief Introduction Introduction Introduction Introduction S7000 allows the user to view and/or adjust the measurement configuration according to the channel types, ANALOG TV, DVB-C, DVB-T/H, DVB-T2, ANALOG FM and DVB-S/S2. INFO INFO Select key (CH CH INFO INFO) to view the channel/satellite information at any measurement screen in cable &...
  • Page 39 S7000 TV Analyzer Operation Manual 2.2.2.2 2.2.2.2 DVB-C DVB-C 2.2.2.2 2.2.2.2 DVB-C DVB-C In the channel type of DVB-C, the following settings are included as shown in the Figure 2-29. Also DOWN select keys (UP UP/DOWN DOWN DOWN) and Alphanumeric Keypad to adjust them.
  • Page 40 S7000 TV Analyzer Operation Manual Figure 2-30...

  • Page 41: 2.2.2.4 Dvb-T2

    S7000 TV Analyzer Operation Manual 2.2.2.4 2.2.2.4 DVB-T2 DVB-T2 2.2.2.4 2.2.2.4 DVB-T2 DVB-T2 In the channel type of DVB-T2, all parameters can be read automatically as shown in the Figure 2-31 Figure 2-31 2.2.2.5 2.2.2.5 ANALOG ANALOG 2.2.2.5 2.2.2.5 ANALOG ANALOG FM In the channel type of ANALOG FM, the following settings are included as shown in the Figure 2-32.
  • Page 42 S7000 TV Analyzer Operation Manual 2.2.3 2.2.3 Satellite Satellite System System 2.2.3 2.2.3 Satellite Satellite System System The satellite system information incudes the following two parts: The satellite and receiver (satellite name, longitude, LO OSC, HI OSC). The transponder (transponder name, channel status, signal type, polarization, LNB OSC), Frequency (Ku, C), Bandwidth (Code Rate, modulation type, Roll Off, SR).
  • Page 43 S7000 TV Analyzer Operation Manual 2.2.3.2 2.2.3.2 ANALOG ANALOG 2.2.3.2 2.2.3.2 ANALOG ANALOG TV Figure 2-35 2.2.3.3 2.2.3.3 2.2.3.3 2.2.3.3 Operation Operation Operation Operation � SAT+ SAT+ SAT- SAT- SAT+ SAT+ SAT- SAT- Select these two softkeys to switch the enabled satellite list.

  • Page 44: Spectrum

    S7000 TV Analyzer Operation Manual 3 3 3 3 Cable&Terrestrial Cable&Terrestrial Signal Test Cable&Terrestrial Cable&Terrestrial Signal Signal Signal Test Test Test ● CAB&TERR Channel Measurement ● Constellation diagram of DVB-C/T/T2 ● Spectrum scan ● Channel scan ● Tilt/Level List Measurement ●...

  • Page 45: Tilt Measurement

    S7000 TV Analyzer Operation Manual The main menu of CAB&TERR is shown in Figure 3-1. Figure 3-1 The function icons of the main menu are defined as follows: ---- Channel measurement � ---- Constellation diagram measurement � Spectrum analysis ---- �...
  • Page 46 S7000 TV Analyzer Operation Manual Figure 3-2 Up to sixteen user plans can be built and saved. The user plans are named as UsrPlan00 ~ UsrPlan15. Users can define one plan as the current user channel plan and edit the name of the current user channel plan.
  • Page 47 S7000 TV Analyzer Operation Manual Channel Channel Measurement Measurement 3.1 Channel Channel Measurement Measurement The function of Channel Measurement is used to test the basic parameters of the relevant channel types, and the channel types are as follows: ANALOG TV...
  • Page 48 S7000 TV Analyzer Operation Manual � ENTER ENTER ENTER ENTER key, press to enter the entry status of parameters and makes the character keys work. Press the key again to confirm the current value input. 3.1.2 3.1.2 DVB-C DVB-C 3.1.2 3.1.2 DVB-C...
  • Page 49 S7000 TV Analyzer Operation Manual � SPECT SPECT SPECT SPECT Press the key to enter SEPCTRUM function directly. 3.1.3 DVB-T/H 3.1.3 3.1.3 3.1.3 DVB-T/H DVB-T/H DVB-T/H The interface of DVB-T/H Channel Measurement refers to Figure 3-6. It can measure Power level/MER/CBER/VBER and so on.
  • Page 50 S7000 TV Analyzer Operation Manual 3.1.4 3.1.4 DVB-T2 DVB-T2 3.1.4 3.1.4 DVB-T2 DVB-T2 The interface of DVB-T2 Channel Measurement refers to Figure 3-7. It can measure Power level/MER/CBER/LBER and so on. Figure 3-7 3.1.4.1 3.1.4.1 Parameter Parameter 3.1.4.1 3.1.4.1 Parameter Parameter �...
  • Page 51 S7000 TV Analyzer Operation Manual 3.1.5 3.1.5 ANALOG ANALOG 3.1.5 3.1.5 ANALOG ANALOG FM The interface of ANALOG FM Channel Measurement refers to Figure 3-8. It can measure Level and so Figure 3-8 3.1.5.1 Parameter 3.1.5.1 3.1.5.1 3.1.5.1 Parameter Parameter Parameter �...
  • Page 52 S7000 TV Analyzer Operation Manual Constellation Constellation diagram diagram 3.2 Constellation Constellation diagram diagram The constellation diagram function is used for observing the constellation diagram and the relevant parameters of the digital channel. It supports for DVB-C, DVB-T/T2 and so on.
  • Page 53 S7000 TV Analyzer Operation Manual � ZOOM+ ZOOM+ ZOOM+ ZOOM+ Press the key to zoom in the quadrant which is selected. Refer to Figure 3-11. Figure 3-11 � ZOOM- ZOOM- ZOOM- ZOOM- Press the key to zoom out the quadrant which is selected.
  • Page 54 The interface also displays the results of MER, CBER and VBER on the current channel. The constellation diagram supports for the mode QPSK, 16QAM and 64QAM. The constellation diagram and MER are relevant to the carrier which is selected to measure. S7000 supports for two kinds of carriers: DATA carrier and TPS carrier.
  • Page 55 S7000 TV Analyzer Operation Manual Figure 3-14 � ZOOM- ZOOM- ZOOM- ZOOM- Press the key to zoom out the quadrant which is selected. � CARRIER CARRIER CARRIER CARRIER The key is used for selecting the display type of constellation diagram (All carriers or Sub carrier).
  • Page 56 S7000 TV Analyzer Operation Manual Figure 3-16 � NEXT>> NEXT>> NEXT>> NEXT>> Press this key to next page as Figure 3-17. Figure 3-17 � SPECT SPECT SPECT SPECT Press the key to enter SEPCTRUM function directly. � Press the key to enter MER function directly.
  • Page 57 S7000 TV Analyzer Operation Manual The interface also displays the results of MER, CBER and LBER on the current channel. The constellation diagram supports QPSK, 16QAM, 64QAM and 256QAM. NOTE: NOTE: constellation constellation diagram diagram measurement measurement parameters parameters displayed...
  • Page 58 S7000 TV Analyzer Operation Manual Figure 3-20 � SPECT SPECT SPECT SPECT Press the key to enter SEPCTRUM function directly. � MEAS MEAS MEAS MEAS Press the key to enter Channel Measurement function directly. � T2 INFO INFO INFO INFO Press the key to enter the function of DVB-T2 parameters.
  • Page 59 Operation Manual Spectrum Spectrum 3.3 Spectrum Spectrum S7000’s spectrum function can monitor the signal of CAB&TERR. Refer to Figure 3-21. Figure 3-21 The display spectrum dynamic range is up to 80dB: � Adjust REF level manually and automatically. � Adjust SCALE manually and automatically.

  • Page 60: Operation

    S7000 TV Analyzer Operation Manual Refer to Figures 3-22 and 3-23. � MARK MARK MARK MARK. Move the marker to check frequency and level. Refer to Figure 3-21. Figure 3-22 Figure 3-23 3.3.2 3.3.2 Operation Operation 3.3.2 3.3.2 Operation Operation �...
  • Page 61 S7000 TV Analyzer Operation Manual Figure 3-24 Figure 3-25 Figure 3-26...
  • Page 62 S7000 TV Analyzer Operation Manual � PEAK PEAK PEAK PEAK Peak position finding, this function is just enable when enable the marker function. Press the key again to exit this function. � Press the key to open the max hold function. Refer to Figure 3-27.
  • Page 63 S7000 TV Analyzer Operation Manual � DISPLAY DISPLAY DISPLAY DISPLAY Press the key to switch Display mode. Refer to Figures 3-28 and 3-29. � PRE-AMP PRE-AMP PRE-AMP PRE-AMP Press the key to take on/off the preamplifier. When enable it, an icon ( ) will display on the bottom status bar.
  • Page 64 3.4 Channel Channel Channel Scan Scan Scan S7000 provides with channel scan function in order to test the flatness and amplitude of TV system quickly. Users can set up the limit value before channel scan (See Section 2: SETUP SETUP SETUP SETUP->...
  • Page 65 S7000 TV Analyzer Operation Manual Figure 3-31 � LIMIT LIMIT LIMIT LIMIT Press the key to active LIMIT function. Refer to Figure 3-32. The two boundary lines are the min level value and the max level value. The channel between two boundary lines is the qualified channels.
  • Page 66 3.5 Tilt Tilt measurement measurement Tilt measurement is the effective solution to check the flatness and splitter’s gain of cable system, S7000 can get levels of 16 channels and observe the measurement result and graph easily. SETUP SETUP SETUP-> -> -> ->CHANNEL...
  • Page 67 S7000 TV Analyzer Operation Manual move the marker to check the measurement result. Figure 3-35 Figure 3-36 Figure 3-37 � Press the key to enter SETUP interface directly.

  • Page 68: Cnr

    S7000 TV Analyzer Operation Manual CNR---ANALOG CNR---ANALOG 3.6 CNR---ANALOG CNR---ANALOG TV The interface of CNR measurement is shown in Figure 3-38. Figure 3-38 3.6.1 3.6.1 Parameter Parameter 3.6.1 3.6.1 Parameter Parameter � CH, Show the channel number of the current channel.

  • Page 69: Hum

    S7000 TV Analyzer Operation Manual HUM---ANALOG HUM---ANALOG 3.7 HUM---ANALOG HUM---ANALOG TV HUM modulation is also named power hum modulation distortion, which caused by low-frequency interference of the power. Users can set up the hum frequency before measurement (See Section 2:...

  • Page 70: Mod

    S7000 TV Analyzer Operation Manual MOD---ANALOG 3.8 MOD---ANALOG MOD---ANALOG MOD---ANALOG TV The interface of MOD measurement is shown in Figure 3-40. Figure 3-40 3.8.1 3.8.1 Parameter Parameter 3.8.1 3.8.1 Parameter Parameter � CH, Show the channel number of the current channel.

  • Page 71: Evs

    S7000 TV Analyzer Operation Manual EVS---DVB-C 3.9 EVS---DVB-C EVS---DVB-C EVS---DVB-C The interface of EVS measurement is shown in Figure 3-41. Figure 3-41 The interface of EVS also displays MER and BER of the current channel. EVS supports the signal type DVB-C and the mode 16QAM, 32QAM, 64QAM, 128QAM and 256QAM.
  • Page 72 S7000 TV Analyzer Operation Manual Figure 3-43 Figure 3-44 � PEAK PEAK PEAK PEAK Peak position finding, this function is just enable when enable the marker function. Press the key again to exit this function. � RETURN RETURN RETURN RETURN...

  • Page 73: Ber

    S7000 TV Analyzer Operation Manual 3.10 3.10 BER---DVB-C BER---DVB-C 3.10 3.10 BER---DVB-C BER---DVB-C The interface of BER is shown in Figure 3-45. Figure 3-45 In Figure 3-45, the meanings of abbreviations are as follows: abbreviations meaning meaning meaning meaning Error...

  • Page 74: Mer

    S7000 TV Analyzer Operation Manual 3.11 3.11 MER---DVB-T MER---DVB-T 3.11 3.11 MER---DVB-T MER---DVB-T The interface of MER is shown in Figure 3-46. Figure 3-46 The function supports for the signal type DVB-T/H and it can measure MER up to 70 times. When the carrier type is 2K, the carrier range is from 0 to 1704.
  • Page 75 S7000 TV Analyzer Operation Manual � HOLD/TRIG HOLD/TRIG HOLD/TRIG HOLD/TRIG Hold or Trig the measurement. � REFRESH REFRESH REFRESH REFRESH Refresh. � << << << << Press the key to select the carrier range towards the left. � >> >>...
  • Page 76 S7000 TV Analyzer Operation Manual 3.12 3.12 ECHOES---DVB-T ECHOES---DVB-T 3.12 3.12 ECHOES---DVB-T ECHOES---DVB-T The interface of ECHOES is shown in Figure 3-48. Figure 3-48 � The function supports the signal type DVB-T/H and the measurement results have two display formats: Curve and List.
  • Page 77 S7000 TV Analyzer Operation Manual LIST LEFT RIGHT � LIST LIST LIST When disable the key, users can press keys (LEFT LEFT LEFT/RIGHT RIGHT RIGHT) to move marker on DOWN DOWN LEFT LEFT RIGHT RIGHT curve. When enable the key, users can press...

  • Page 78: Echoes

    S7000 TV Analyzer Operation Manual 3.13 3.13 DVB-T2 DVB-T2 INFO---DVB-T2 INFO---DVB-T2 3.13 3.13 DVB-T2 DVB-T2 INFO---DVB-T2 INFO---DVB-T2 The channel parameters are recognized automatically. Users can read the parameters on the interface. Refer to Figures 3-51 and 3-52. Figure 3-51 Figure 3-52 3.13.1...
  • Page 79 S7000 TV Analyzer Operation Manual 4 4 4 4 Satellite Satellite Signal Test Satellite Satellite Signal Signal Signal Test Test Test ● Satellite Transponder Measurement ● Constellation Diagram ● Satellite Spectrum ● Dish Align ● DiSEqC (Digital Satellite Equipment Control)
  • Page 80 ENTER) to enter the relevant interfaces. S7000 will display the satellite name in use on the title bar, as shown in Figure 4-1. “AP5” is the satellite name in use. Before testing, users need to select the satellite first by press...
  • Page 81 ENTER) to switch the feed options, and press key (SETUP SETUP SETUP SETUP) again to return. When user setup the LNB feed by S7000, the feed status will be displayed on title bar (Icons, feed voltage and current). Note: Note: Note: If If If If user...
  • Page 82 BW, channel bandwidth. � SR, symbol rate. For DVB-S/S2, Symbol rate range is from 1MS/s to 45MS/s. � MODE MODE MODE MODE, Modulation mode. S7000 can recognize automatically, when the signal is locked. 4.1.2 Operation 4.1.2 4.1.2 4.1.2 Operation Operation Operation �...
  • Page 83 Shortcut key to power feed control function. measurement BER measurement measurement measurement 4.1.3 4.1.3 4.1.3 4.1.3 BER (bit error rate) measured in S7000 are defined below: DVB-S DVB-S For DVB-S DVB-S: CBER (BER before FEC) VBER (BER after Viterbi) For DVB-S2 DVB-S2 DVB-S2...
  • Page 84 SR, symbol rate. For DVB-S/S2, symbol rate range is from 1MS/s to 45MS/s. � MODE MODE MODE MODE, Modulation mode. S7000 can recognize automatically, when the signal is locked. � CR, code rate, S7000 can recognize automatically, when the signal is locked. 4.2.2 Operation 4.2.2...

  • Page 85: Spectrum

    DRIVE, satellite spectrum analyzer support easy operation to drive positioner. � DISPLAY DISPLAY DISPLAY DISPLAY, S7000 support two display mode as shown in Figures 4-7 and 4-8. � AUTO AUTO AUTO AUTO, automatic adjust by signal level to get the best view.
  • Page 86 CENT CENT, centre frequency range is from 955MHz to 2145MHz. If the input frequency is above 2145MHz, S7000 will indentify if the input frequency is valid C band or Ku band, if valid, S7000 will calculate the SAT-IF automatically. For example:...
  • Page 87 S7000 TV Analyzer Operation Manual Figure 4-9 Figure 4-10 Figure 4-11...
  • Page 88 S7000 TV Analyzer Operation Manual 4.3.2 4.3.2 Operation Operation 4.3.2 4.3.2 Operation Operation � AUTO AUTO AUTO AUTO Auto adjust the level scale and reference level to get the best view. � HOLD/TRIG HOLD/TRIG HOLD/TRIG HOLD/TRIG Hold or Trig the measurement.
  • Page 89 S7000 TV Analyzer Operation Manual � DISPLAY DISPLAY DISPLAY DISPLAY Press this key to switch display mode, as shown in Figures 4-7 and 4-8. � PRE-AMP PRE-AMP PRE-AMP PRE-AMP Press the key to take on/off the preamplifier. When enable it, an icon ( ) will display on bottom status bar.
  • Page 90 Dish alignment function as shown in Figure 4-14. User can use this function to align dish antennas. Figure 4-14 S7000 measure the quality and strength of transponders and easy to align the dish. The dish align step is as follows: 1.
  • Page 91 S7000 TV Analyzer Operation Manual The bellowing parameters may be useful for dish align: S7000 can setup position information by manual or USB-GPS module(Option). Figure 4-16 Azimuth (0-180°). Angle of elevation (0-90°). Angle of polarization. Dish alignment function display the testing result in percentage (0%-100%) with different color as shown in Figure 4-17.
  • Page 92 Figure 4-19 � MUTE MUTE MUTE MUTE Press this key to make S7000 in mute state, this will shut down the busser. � Switch the transponder/drive positioner/adjust buzzer volume. � Switch the transponder. � Shortcut key to power feed control function.
  • Page 93 DiSEqC DiSEqC DiSEqC (Digital Satellite Equipment Control), is a communication protocol between the satellite receiver and the devices. S7000 supports DiSEqC 1.0, 1.1, 1.2, 2.X. DiSEqC & SaTCR control function as shown in Figures 4-20 and 4-21. Figure 4-20 Figure 4-21 4.5.1...
  • Page 94 S7000 TV Analyzer Operation Manual HALT ---- DISABLE LIMITS ---- ENABLE LIMITS ---- SET LIMIT EAST ---- SET LIMIT WEST ---- DRIVE EAST SEC 1 to 127 Positioner DRIVE EAST STEPS 1 to 127 DRIVE WEST SEC 1 to 127...
  • Page 95 S7000 TV Analyzer Operation Manual � Press this key to send command. � Shortcut key to power feed control function. NOTE: NOTE: NOTE: NOTE: 1. 1. 1. 1. DiSEqC&SaTCR DiSEqC&SaTCR DiSEqC&SaTCR DiSEqC&SaTCR command command command command sending sending sending sending function...
  • Page 96 S7000 TV Analyzer Operation Manual 5 5 5 5 TS Monitor Monitor & & & & Analysis Analysis TS Monitor Monitor Analysis Analysis ● Brief introduction of Video Decoder and TS analysis ● RealTime Decoder ● Channel Edit ● TS Recorder ●...
  • Page 97 S7000 TV Analyzer Operation Manual Brief introduction 5.1 Brief Brief Brief introduction introduction introduction TS analyzer module supports DVB and ATSC standard TS analysis including RealTime TS and Offline TS and also IPTV data. Subfunctions are as follows: RealTime Decoder, Recorder, Channel Edit, Replay, Basic Information, TR101 290, PID Viewer, Program Information, PCR, Program List, PSI/SI, Data Capture and TR101 290 Parameters Setting.
  • Page 98 S7000 TV Analyzer Operation Manual RealTime Decoder 5.2 RealTime RealTime RealTime Decoder Decoder Decoder Figure 5-1 This subfunction can decode the program according to the input source of RF, ASI or IPTV. Program information are shown in the list, including program number, CA, service name, provider, service type, video stream type and the video resolution.
  • Page 99 S7000 TV Analyzer Operation Manual � Video Type Video Video Video Type Type Type: the video type of the program, “---”is displayed if video information is not included in the program. � Resolution Resolution Resolution Resolution: the video resolution, “---”is displayed if the video information is not parsed.
  • Page 100 S7000 TV Analyzer Operation Manual Channel Edit 5.3 Channel Channel Channel Edit Edit Edit Figure 5-3 5.3.1 5.3.1 Description Description 5.3.1 5.3.1 Description Description To edit channel information briefly, shown as Figure 5-3.
  • Page 101 S7000 TV Analyzer Operation Manual Recorder Recorder 5.4 Recorder Recorder Figure 5-4 5.4.1 5.4.1 Description Description 5.4.1 5.4.1 Description Description To input recorder file name in TS format. 5.4.2 Operation 5.4.2 5.4.2 5.4.2 Operation Operation Operation � Take the input name “10” for example, the recording file name is “10.ts”, and press...
  • Page 102 S7000 TV Analyzer Operation Manual disk.
  • Page 103 S7000 TV Analyzer Operation Manual Replay Replay 5.5 Replay Replay Figure 5-6 5.5.1 5.5.1 Description Description 5.5.1 5.5.1 Description Description To list maximum 200 files (the file size is less than 3GB) with TS or TRP format. Files name and files size are displayed.
  • Page 104 S7000 TV Analyzer Operation Manual 5.5.3 5.5.3 Description Description 5.5.3 5.5.3 Description Description To display the information of Replay, including SID, CA, ServiceName, Provider, ServiceType, VideoType, Resolution, Video PID, Video Bitrate, Audio PID and Audio Bitrate. 5.5.4 Operation 5.5.4 5.5.4 5.5.4 Operation...
  • Page 105 S7000 TV Analyzer Operation Manual Basic Basic Information Information 5.6 Basic Basic Information Information Figure 5-8 5.6.1 5.6.1 Description Description 5.6.1 5.6.1 Description Description This subfunction shows you the basic information of the stream. � RATE RATE TS RATE RATE: Describe the stream transport rate in a second (Mb/s).
  • Page 106 S7000 TV Analyzer Operation Manual TR101 5.7 TR101 TR101 TR101 290 Figure 5-9 5.7.1 5.7.1 Description Description 5.7.1 5.7.1 Description Description The first table lists a basic set of parameters which are considered necessary to ensure that the TS can be decoded.
  • Page 107 S7000 TV Analyzer Operation Manual 5.7.3 5.7.3 Description Description 5.7.3 5.7.3 Description Description It describes the detailed information, including the record time, the standard number. 5.7.4 5.7.4 5.7.4 5.7.4 Operation Operation Operation Operation � To reset to monitor the stream and clear the result.
  • Page 108 S7000 TV Analyzer Operation Manual View View 5.8 PID PID View View Figure 5-11 5.8.1 5.8.1 Description Description 5.8.1 5.8.1 Description Description It describes the information with section, simplified information, value, PID and the CR of every PID of the stream.
  • Page 109 S7000 TV Analyzer Operation Manual Program Program Information Information 5.9 Program Program Information Information Figure 5-12 5.9.1 5.9.1 Description Description 5.9.1 5.9.1 Description Description This function parses the information from audio and video ES. It supports MPEG-1/2/4, H.264 video format and MEPG-1/2/4, AAC audio format. At most two audio information can be displayed.
  • Page 110 S7000 TV Analyzer Operation Manual 5.9.3 5.9.3 5.9.3 5.9.3 Description Description Description Description To display the program information with SID, CA, bitrate, service name, provider, service type. The yellow curve is the video BW rate curve if video information included in the program.The green curve is the first audio BW curve if audio information included in the program.
  • Page 111 S7000 TV Analyzer Operation Manual 5.10 5.10 5.10 5.10 PCR Figure 5-14 5.10.1 5.10.1 Description Description 5.10.1 5.10.1 Description Description To display the PCR accuracy and PCR interval of the selected program. Refer to Figure 5-14. Figure 5-15 shows the detailed PCR information. If the PCR is not exist, “---”is displayed. Different program can have the same PCR and every program can have its PCR.
  • Page 112 S7000 TV Analyzer Operation Manual 5.10.3 5.10.3 Description Description 5.10.3 5.10.3 Description Description Figure 5-15 shows the detailed PCR information, including PCR PID, min accuracy, max accuracy, min interval, and max interval. If the PCR is not exist, “---”is displayed.
  • Page 113 S7000 TV Analyzer Operation Manual 5.11 5.11 Program Program List List 5.11 5.11 Program Program List List Figure 5-16 5.11.1 5.11.1 Description Description 5.11.1 5.11.1 Description Description To list the programs information in ascending order of frequency of the current transport network.
  • Page 114 S7000 TV Analyzer Operation Manual 5.12 PSI/SI 5.12 5.12 5.12 PSI/SI PSI/SI PSI/SI Figure 5-17 5.12.1 5.12.1 Description Description 5.12.1 5.12.1 Description Description Figure 5-17 shows the PSI/SI information of the stream. The left table lists the tables such as PAT, PMT, CAT, NIT_actual, SDT_actual, TDT, MIP, and the right lists the detailed information according to the select table.

  • Page 115: Description

    S7000 TV Analyzer Operation Manual 5.13 Capture 5.13 5.13 5.13 Capture Capture Capture Figure 5-18 5.13.1 Description 5.13.1 5.13.1 5.13.1 Description Description Description To capture data according to the selected PID and display the data in the right box. 5.13.2 5.13.2...
  • Page 116 S7000 TV Analyzer Operation Manual type if data is transport. STOP Move focus Move focus stop capture CLEAR Move focus Move focus clear captured data. Captured data Select the num To show the first list data, and second page show...
  • Page 117 S7000 TV Analyzer Operation Manual 5.14 5.14 Parameter Parameter Setting Setting 5.14 5.14 Parameter Parameter Setting Setting Figure 5-19 5.14.1 5.14.1 Description Description 5.14.1 5.14.1 Description Description To set alarm parameters.

  • Page 118: File Management

    S7000 TV Analyzer Operation Manual 6 6 6 6 File File Management File File Management Management Management ● Picture File Management ● Data File Management...
  • Page 119 HOME) to return to main menu and press F6 F6 (FILES) (FILES) to File Management. S7000 provides internal memory space to store measurement data in LEVEL measurement, Channel Scan, Constellation function. The test result can be saved as JPG format or data format file.
  • Page 120 S7000 TV Analyzer Operation Manual � VIEW VIEW VIEW VIEW Press this key and the picture file view and file name will appear in full screen. Press HOME any key (except key (HOME HOME HOME)) to return to file list window.
  • Page 121 USB device? Select “YES” to send the file and “NO” to give up. If the same name file has been exist in USB device, S7000 has remind dialog box: File already exist, replace? Select “YES” to replace the file and “NO” to give up.
  • Page 122 S7000 TV Analyzer Operation Manual � NEXT>> NEXT>> NEXT>> NEXT>> Press this key to next page as Figure 6-5. Figure 6-5 � SORT SORT SORT SORT Press this key to sort the file in list. The sort key words include Ascend, Descend, Name and Date as Figure 6-6.
  • Page 123 S7000 TV Analyzer Operation Manual � <<PRE <<PRE <<PRE <<PRE Press this key to previous page as Figure 6-1.
  • Page 124 S7000 TV Analyzer Operation Manual Data Data File File 6.2 Data Data File File 6.2.1 6.2.1 6.2.1 6.2.1 Operation Operation Operation Operation � DATA DATA DATA DATA Press this key to view the list of all saved data files. The files are identified by their name, type, date, time and operator, as Figure 6-8.
  • Page 125 S7000 TV Analyzer Operation Manual...
  • Page 126 USB device? Select “YES” to send the file and “NO” to give up. If the same name file has been exist in USB device, S7000 has remind dialog box: File already exist, replace? Select “YES” to replace the file and “NO” to give up.
  • Page 127 S7000 TV Analyzer Operation Manual Note: Note: Note: Note: This This This This key key is is is is disabled disabled disabled disabled if if if if no no file file file file is is is is highlighted. highlighted. highlighted.
  • Page 128 S7000 TV Analyzer Operation Manual � NEXT>> NEXT>> NEXT>> NEXT>> Press this key to next page as Figure 6-12. Figure 6-12 � SORT SORT SORT SORT Press this key to sort the file in list. The sort key words include Ascend, Descend, Name, Type, Date and Operator as Figure 6-13.
  • Page 129 S7000 TV Analyzer Operation Manual � <<PRE <<PRE <<PRE <<PRE Press this key to previous page as Figure 6-8.

  • Page 130: Appendix

    S7000 TV Analyzer Operation Manual 7 7 7 7 Appendix Appendix Appendix Appendix ● Specification ● Explanation of terms...

  • Page 131: Specification

    S7000 TV Analyzer Operation Manual Specification Specification Specification Specification Spectrum Spectrum Spectrum Spectrum Analyzer Analyzer Analyzer Analyzer Frequency Range 5-1050MHz(TV), 950-2150MHz(Satellite) 0-1045MHz(TV), FULL Frequency Span /600/300/200/100/50/20/10MHz(Satellite) Frequency Step 10kHz(TV), 1MHz(Satellite) 30 kHz, 100KHz,300 kHz, 1MHz, 3MHz(TV) Resolution Bandwidth (-3 dB)
  • Page 132 S7000 TV Analyzer Operation Manual Power Level Range 25-110dBμV Level Resolution 0.1dB Power Level Accuracy ±1.5dB(C/N>20dB) MER Measurement > 30dB MER Accuracy ±2.0dB CBER/VBER √ Constellation √ MER Versus Carriers √ Echo Pattern √ DVB-T2 DVB-T2 DVB-T2 DVB-T2 Measurement Measurement...
  • Page 133 S7000 TV Analyzer Operation Manual Echo Pattern √ DVB-S/S2 DVB-S/S2 DVB-S/S2 DVB-S/S2 measurement measurement measurement measurement Modulation Type QPSK,8PSK 2 -45MS/s(DVB-S) 1 - 45MS/s(QPSK DVB-S2) Symbol Rate 1 - 45MS/s(8PSK DVB-S2) Power Level Range 40-110dBμV Level Resolution 0.1dB Power Level Accuracy ±1.5dB(C/N>20dB)
  • Page 134 S7000 TV Analyzer Operation Manual PID List Display all the PIDs in current stream The detail infos about a program if it isn’t be encrypted. The video resolutions and audio Program Information compress rate. Calculate PCR interval and PCR PCR Monitor accuracy Display the PSI/SI infos by tree view.
  • Page 135 S7000 TV Analyzer Operation Manual Option Option Option Option Software upgrade DVB-T2 Software upgrade TS analyzer Software upgrade Software upgrade and GPS module DTMB CMMB...
  • Page 136 S7000 TV Analyzer Operation Manual Explanation Explanation Explanation of of of of terms terms terms 7.3 Explanation terms Average Bit Error Rate Conditional Access DiSEqC DiSEqC DiSEqC DiSEqC Digital Satellite Equipment Control Modulation Error Ratio Error Vector Spectrum INFO INFO...

Table of Contents