Deviser S7200 User Manual page 28

Part II: Settings and Measurements
3-1.3 Importing and Exporting TV Channel Plans
To transfer user channel plan data to and from the S7200, you will first need to insert a USB storage device
into the instrument's top panel.
Once the application reads the USB device, the Export key appears. In addition, if the USB device already
contains some channel plan data, Import appears. This indicates that plans can be imported to the S7200,
as well as exported for use in a PC or other instrument.
Procedure:
1. Press Export to open a dialog, as shown above. The plans saved to the S7200's local memory appear
on the right, with plans (if any) saved to the USB device on the left.
2. Using the arrow keys, highlight a plan in local memory and click the rotary knob to place a check mark
next to it. Repeat until all plans for export are marked.
3. Then, turn the rotary knob to highlight the [<<<<<<] button between the two panes and click the knob
to confirm.
The selected plan(s) will be transferred to the USB device.
If a plan with the same name already exists on the destination USB device, you will be prompted to replace
it. Select OK to overwrite, or press Esc to cancel.
The process for importing channel plans to the S7200 is similar. Simply insert a USB storage device with saved
channel plan data, select Import instead of Export, and select your desired plans in the left-hand pane.
Then navigate to the [>>>>>>] button and confirm the copy operation.
28