Deviser S7200 User Manual page 75

6-12.10 EPG (Electronic Program Guide)
Currently, the S7200 only supports the EPG function for ATSC (8VSB). From the TS analysis screen, tap NEXT
and locate the EPG key. This key is unavailable in DVB mode; user must set the standard to ATSC to activate
the EPG function.
In this guide, select a program from the list in the left-hand panel. In the right, you can browse all events
related to that program.
6-12.11 Record and Replay Transport Stream
Recording the Transport Stream
The S7200 can be used to record transport stream data to a solid-state drive (if the SATA SSD option has
been purchased) or to a storage drive connected to the unit's USB port.
First, press the (or TS measurement) button. Tap INFO, then RECORD to open a recording dialog. Select
the file destination (USB disk or SATA SSD) and enter a filename using the touchscreen keyboard. Once the
transport stream has started, the recording information is displayed on the bottom status bar.
Part II: Settings and Measurements
75