Deviser S7200 User Manual page 138

Part IV: System Functions
13-4.6 Transport Stream Input
In this menu, you can select a transport stream input type: RF, ASI, DISK, or IPTV.
RF Input
Cable, terrestrial, and satellite signals from the RF input port. The transport stream is demodulated from the RF
signal, then enters the TS analysis module. In RF input mode, the TS analysis display shows channel/frequency
info in the lower-left corner.
ASI Input
Baseband TS signal from the ASI input port, which then enters the TS analysis module. In ASI input mode, the
TS analysis display shows "ASI INPUT" in the lower-left corner.
DISK Input
Data stored on the internal SATA SSD (Solid State Disk) or inserted USB drive, which then enters the TS analysis
module. When the SSD option has been installed, the status bar displays the
can now save and load transport stream recordings on the drive. For instructions, see subsection 6-12.11. In
DISK mode, the TS analysis display shows the record's filename and timestamp in the lower-left corner.
138
icon, indicating that users