Table of Contents
Advertisement
The "Real Robot" indicates that the robotic arm is connected. It is
currently a real robotic arm, and all control functions on the live control
panel are available.
1.5.2 Emergency Stop
Click on the emergency stop button to immediately stop the current
motion and clear all cached commands.
Note:
The "STOP" button in xArm Studio is different from the one on the
control box.
1. The "STOP" button in xArm Studio allows the robotic arm to
stop the current
immediately. It is a software stop, and the power is still on.
2.
The Emergency STOP button on the control box: Send out a stop
command to cut off the power supply of the robotic arm, and thence
the posture of the robotic arm will slightly brake and fall.
motion and clear all cache commands
139
Advertisement
Table of Contents
