UFactory XARM User Manual page 132

robotic arm will be automatically reconnected. The operation is
equivalent to the shutdown and startup process of the control box,
and restart process takes 3 to 4 minutes.
Note: The 【xArm shutdown】 and【 xArm Reboot】buttons do not
affect the main power supply of the control box and the power
supply of the robotic arm.
1.4.10.2 Software / Firmware Update
When updating software and firmware, make sure that the local area
network where the computer and control box are located can
communicate with the external network. In addition, make sure the
132