Table of Contents
Advertisement
REVISIONS
Print Data
*Manual Number
May,2000
IB(NA)67286-E
*The manual number is given on the bottom left of the back cover.
Addition of compliance to EC directive 1 (1), (2), (3)
Addition of 2. Cautions for appliance (1) Servo amplifier and servo
motor to be used to EC directive
UL/C-UL Standard (1) Addition of servo amplifier and servo motor
UL/C-UL Standard (4) Change in flange table
UL/C-UL Standard (2) Addition of optional parts and peripheral
Section 1-1-2 (1)
Section 2-3-5 (4)
Chapter 3
Section 3-1-2 (4)q
Section 3-1-2 (4)w
Section 3-1-3 (6)
Section 3-1-4 (1)
Section 3-1-4 (2)
Section 3-1-4 (3)
Section 3-2-4 (1)
Section 3-3
Section 3-6
Section 3-7
Section 3-7 (1)
Section 3-7 (3) (a)
Section 3-7 (3) (b)
Section 3-7 (3) (c)
Section 3-7 (3) (d)
Section 4-2 (4)
Section 6-1-2 (2)w
Section 6-1-3
Section 6-2-6 (2)
Section 8-1-1 (2)
Section 8-2-2
Section 9-3 (1)
Section 10-1 (2)
Section 10-5-2 (1)
Section 10-5-2 (2)
Section 10-5-2 (5)
Section 10-5-3 (3)
Revision
Addition of (6) e.
to be used
devices
Change in rating name plate
Change of parameter detail description
No. 2 initial value to 0002
Addition of some text to parameter No. 47
Addition of some text to parameter No. 48
Addition of caution drawing
Change to emergency stop
Change in max. pulse width of detector Z-
phase pulse to 400
Addition to figure of timing chart for switching
Partial change in drawing of digital interface
D1-1
Partial change in figure
Partial change in figure
Change of servo motor side connector to
1-172169-9
Partial deletion of figure
Partial change in figure of timing chart at the
time of occurrence of alarm
Addition of point
Partial change in connection diagram
Change in text
Partial change in figure
Partial change in figure
Partial change in figure
Deletion of shaft allowable load table (kgf)
Change of signals listed in relay terminal block
side table of detector cable connection
diagram to those abbreviated
Addition of point
Change in diode mounting drawing
Partial change in figure
Addition of some text
Addition of A. 25 Trouble, Cause Remedy
Deletion of Table 9-2 (kgf.cm)
Deletion of Table (kgf.cm)
Change in all HC-MF series
Change in HC-MF-UE series
Change in HC-UF3000 rpm series
Change of servo motor detector plug
Advertisement
Table of Contents
