Dürkopp Adler D869 e-con Operating Instructions Manual page 96

94
Setting options Max. sewing speed
Menu item Setting 1
linear Max.
Sewing speed
Value range 0000 – 4000
Min. Material
thickness
Value range
00.0 – 10.0 [mm]
Max. Material
thickness
Value range
00.0 – 10.0 [mm]
5.6.3.4 Setting the Outputs (Output) parameter
This parameter provides virtual outputs that can be assigned
customer-specific functions. They can be used when customer-
specific applications require a signal from the control of the
machine.
This parameter cannot be used unless the virtual outputs have
been assigned to a physical output at the Technician level.
This requires that the parameter Additional I/O Configu-
ration can be configured at the Technician level; for more
details, refer to the explanation in the  Service Instructions.
Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
Setting 2
Maximum speed reached
at the upper material
thickness limit.
Material thickness at which
the increase in sewing
speed should start.
Material thickness up to
which the increase in
sewing speed should
occur.