Dürkopp Adler D869 e-con Operating Instructions Manual page 80

78
Fig. 50: Setting up the user interface (3)
4. Press and hold the desired tile and drag it to move it into or
out of the grid.
5. Press to return to Settings or
Adjusting the information displayed in the status bar
To adjust the appearance of the status bar:
1. Go to Settings (see above).
Fig. 51: Setting up the user interface (4)
(4) - Screen configuration
2. Go to Screen configuration (4) and press on Manual
mode - Status bar configuration (5).
 The interface used for configuring the status bar opens.
Programming Commander DELTA
(5) - Status bar configuration
Operating Instructions D869 e-con - 00.0 - 06/2023
to return to Manual mode.
④
⑤