Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
3.
Press the item User Configuration (2) on the left.
You are in the User Configuration.
5.3.1
Setting the language
Here, you can set the language of the software.
Fig. 31: Setting the language (1)
(1) - Language indicator
To set the language:
1.
Press on the language indicator (1).
A list holding the language selection opens:
Fig. 32: Setting the language (2)
2.
Press on the desired language.
The language of the control panel is changed immediately.
①
57