Dürkopp Adler D869 e-con Operating Instructions Manual page 30

28
Fig. 8: Threading the needle thread (3)
②
(2) - Thread tensioning spring
(8) - Thread guide
(9) - Lower thread guide
(10) - Upper thread guide
8. Feed the thread around the pin (13) from left to right and then
from top to bottom through the rear hole of the needle thread
regulator (11).
9. Insert the thread from the right to the left through the lower
guide of the thread lever (12).
10. Insert the thread through the upper thread guide (10).
11. Insert the thread through a hole in the lower thread guide (9).
⑬
(11) - Needle thread regulator
(12) - Thread lever (covered)
(13) - Pin
Operating Instructions D869 e-con - 00.0 - 06/2023
Operation
⑫
⑪
②
⑩
⑨
⑧