Table of Contents
Advertisement
152
7.5
Tabletop
Ensure that the tabletop has sufficient load-bearing capacity and
strength. If you want to make your own tabletop, use the dimen-
sions given in the diagram in the Appendix ( p. 209) as a
template.
7.5.1
Completing the tabletop
The tabletop is optional. For drawings that allow you to inde-
pendently assemble a tabletop, refer to the Appendix ( p. 209).
Fig. 70: Completing the tabletop
①
②
(1) - Cable duct
(2) - Drawer
To complete the tabletop:
1.
Screw the drawer (2) with the left-hand bracket to the under-
side of the tabletop.
2.
Screw the oil pan (3) in place under the slot for the machine.
(3) - Oil pan
(4) - Reel stand
Operating Instructions D869 e-con - 00.0 - 06/2023
Setup
④
③
Advertisement
Table of Contents
