Setting The Seam Begin/Segment Begin Parameters - Dürkopp Adler D869 e-con Operating Instructions Manual

Icon Parameter
Seam begin bartack settings
Bartack at seam begin
Number of stitches backwards
Number of stitches forward
124
Setting options Max. sewing speed
Menu item Setting 1
linear Max.
Sewing speed
Value range 0000 – 4000
Min. Material
thickness
Value range
00.0 – 10.0 [mm]
Max. Material
thickness
Value range
00.0 – 10.0 [mm]
5.8.6 Setting the Seam Begin/Segment Begin
parameters
There are various options for setting the Seam Begin/Segment
Begin parameters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Programming Commander DELTA
Setting
Value range
On/Off
Value range
01 - 50
Value range
01 - 50
Operating Instructions D869 e-con - 00.0 - 06/2023
Setting 2
Maximum speed reached
at the upper material
thickness limit.
Material thickness at which
the increase in sewing
speed should start.
Material thickness up to
which the increase in sew-
ing speed should occur.