Assembling The Tabletop To The Stand - Dürkopp Adler D869 e-con Operating Instructions Manual

Setup
Operating Instructions D869 e-con - 00.0 - 06/2023
3. Screw the cable duct (1) to the underside of the tabletop.
4. Insert the reel stand (4) into the hole.
5. Assemble the reel stand (4) with nut and washer.
6. Tighten the thread reel holder and the unwinding bracket on
the reel stand (4) in such a way that they are exactly opposite
each other.
7.5.2

Assembling the tabletop to the stand

Fig. 71: Assembling the tabletop to the stand
①
②
(1) - Head section
To assemble the tabletop to the stand:
1. Place the tabletop on the head sections (1) of the inner bars.
2. Use the screws (2) to fasten the tabletop at the screw holes
of the head sections.
①
②
(2) - Screws
153