Dürkopp Adler D869 e-con Operating Instructions Manual page 188

Code Type
2152 Error
2171 Error
2172 Error
2173 Error
2174 Error
2175 Error
2176 Error
2177 Error
2178 Error
2179 Error
2180 Error
2181 Error
186
Possible cause
Stepper motor card X30
overcurrent
Stepper motor card X30
Watchdog (Stitch length)
Stepper motor card X30
motor overload / overvoltage /
overcurrent (Stitch length)
Stepper motor card X30
Sewing motor encoder not
connected (Stitch length)
Stepper motor card X30
Sewing motor encoder not
init (Stitch length)
Stepper motor card X30 Init
Position not found (Stitch
length)
Stepper motor card X30 not
Enabled (Stitch length)
Stepper motor card X30
Overload (Stitch length)
Stepper motor card X30
Encoder failure
(Stitch length)
Stepper motor card X30
Current sensor failure
(Stitch length)
Stepper motor card X30
Incorrect stepping motor
direction of rotation
(Stitch length)
Stepper motor card X30
Reference drive failure
(Stitch length)
Remedial action
• Check for stiff movement
• Perform a software update
• Check selection of class
• Check selection of class
• Replace control
• Replace encoder
• Replace stepper motor
• Replace control
• Perform a software update
• Check selection of class
• Check for stiff movement
• Replace encoder
• Replace motor
• Replace control
• Check for stiff movement
• Replace encoder
• Replace motor
• Replace encoder
• Replace control
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine
distributor and change it if necessary
• Check for stiff movement
• Replace encoder
• Replace motor
Operating Instructions D869 e-con - 00.0 - 06/2023
Troubleshooting