Table of Contents
Advertisement
26
3.
Click on the tile
The instructional video Threading: two needles starts
automatically.
4.5.1
In 1-needle machines
To thread the needle thread:
1.
Fit the thread reel on the reel stand.
The unwinding bracket must stand directly above the thread
reel.
2.
Feed the thread from the rear to the front through the thread
guide on the unwinding bracket.
Fig. 6: Threading the needle thread (1)
②
(1) - Tube
(2) - Thread tensioning spring
(3) - Hook
(4) - Pin
in the left menu bar.
(5) - Front tensioner
(6) - Rear tensioner
(7) - Pretension
Operating Instructions D869 e-con - 00.0 - 06/2023
Operation
①
⑦
⑥
⑤
④
③
Advertisement
Table of Contents
