Dürkopp Adler D869 e-con Operating Instructions Manual page 95

Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
Setting options Needle thread tension
Menu item Setting 1
linear Needle thread tension
Value range 00 – 99
Min. Material
thickness
Value range
00.0 – 10.0 [mm]
Max. Material
thickness
Value range
00.0 – 10.0 [mm]
2.OnOff Min. Material
thickness
Value range
00.0 – 10.0 [mm]
2.On Min. Material
thickness
Value range
00.0 – 10.0 [mm]
Setting options Sewing foot pressure
Menu item Setting 1
linear Sewing foot pressure
Value range
00 – 20
Min. Material
thickness
Value range
00.0 – 10.0 [mm]
Max. Material
thickness
Value range
00.0 – 10.0 [mm]
Setting 2
Maximum needle thread
tension reached at the
upper material thickness
limit.
Material thickness at which
the increase in needle
thread tension should start.
Material thickness up to
which the increase in nee-
dle thread tension should
occur.
Material thickness from
nd
which the 2 needle
thread tension should be
used.
Material thickness from
nd
which the 2 needle
thread tension should be
used.
Setting 2
Maximum sewing foot pres-
sure reached at the upper
material thickness limit.
Material thickness at which
the increase in sewing foot
pressure should start.
Material thickness up to
which the increase in sew-
ing foot pressure should
occur.
93