Connecting The Control - Dürkopp Adler D869 e-con Operating Instructions Manual

Setup
Operating Instructions D869 e-con - 00.0 - 06/2023
Fig. 96: Establishing equipotential bonding (2)
②
①
(1) - Equipotential bonding
To establish equipotential bonding:
1. Connect the equipotential bonding (1) with the control (2).

7.16.3 Connecting the control

DANGER
Risk of death from live components!
Unprotected contact with electricity can result in
serious injuries or death.
Disconnect the power plug before connecting the
control. Ensure the power plug cannot be
unintentionally reinserted.
To connect the control:
1. Connect the control as specified in the wiring diagram
( p. 209).
(2) - Control
173