Dürkopp Adler D869 e-con Operating Instructions Manual page 115

Programming Commander DELTA
Icon Parameter
Stitch length
Needle thread tension
Sewing foot pressure
Max. sewing speed
Operating Instructions D869 e-con - 00.0 - 06/2023
Setting
The stitch length changes slightly
depending on the material thickness.
For this reason, the stitch length
can be adjusted to different material
thicknesses by the software.
Depending on the material thickness,
the needle thread tension can be
adjusted to different material
thicknesses by the software.
The sewing foot pressure can be
adjusted to different material
thicknesses by the software.
The maximum sewing speed can
be adjusted to different material
thicknesses by the software.
113