Importing/Exporting Programs - Dürkopp Adler D869 e-con Operating Instructions Manual

134
5.8.8.1 Setting the Sewing stop parameters
You can set additional parameters for the Sewing stop. Possible
settings and the corresponding value ranges are listed in the table.
Icon Menu item
Needle up position
Thread trimmer
(can only be set in the last
segment)
Sewing foot lift at
segment end
High sewing foot
lift after thread
cutting/at segment
end
5.9

Importing/exporting programs

Programs cannot be imported or exported by the Default User.
This process requires that the user be logged in as a technician,
 Service Instructions.
Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
Setting option
Value range
On/Off
Value range
On/Off
Value range
On/Off
Value range 00 – 20 [mm]
(depending on subclass)