Adjusting The Slide Assembly Tray On The Slide Rails - Quantum P1000 Series Unpacking Instructions Manual

Figure 12 Slide Assembly
Tray, Fully Extended
Intermediate
channel lock

Adjusting the Slide Assembly Tray on the Slide Rails

To adjust the slide assembly tray on the slide rails:
Procedure
Loosen the inner nuts on both sides of the slide assembly (see
1
figure 13).
Access these nuts from underneath the slide assembly tray.
Move the slide assembly tray forward or backward as necessary.
2
Installing the Slide Assembly in the Rack
ATL P1000 Series Library Unpacking Instructions
Access hole
Document 6221100-02, Ver. 2, Rel. 0
March 1999
Intermediate channel
Inner channel lock
Inner channel
12
19