CAUTION:
1 Turn off power to the emulation probe.
2 Disconnect all cables from the emulation probe, including the power
3 Remove the cover from the emulation probe:
To install the emulation migration
Electrostatic discharge can damage electronic components. Use grounded
wrist straps and mats.
The tools necessary for this procedure are supplied with the emulation
migration.
cord, LAN cable, serial cable, module/probe interconnect cable, and
target cable.
a Remove the 2 nuts and 2 screws from the front of the emulation
probe.
Emulation for the Motorola M•CORE
Installing an Agilent E5902B Emulation Migration
111