To Telnet To The Emulation Probe; To List The Emulation Probe Commands - Agilent Technologies E5900B User Manual

Troubleshooting the Emulation Probe
Using the Emulation Probe Command Line Interface
3 The command line window will be displayed and available for use.

To telnet to the emulation probe

You can establish a telnet connection to the emulation probe if:
• A host computer and the probe are both connected to a local-area network
(LAN), and
• The host computer has the telnet program (often part of the operating
system or an internet software package).
To establish a telnet connection:
1 Find out the LAN address or LAN name of the emulation probe.
2 Start the telnet program.
If the LAN name of the emulation probe is "test2", the command might look
like this:
telnet test2
3 If you do not see a prompt, press the
To exit from this telnet session, type <CTRL>D at the prompt.

To list the emulation probe commands

To list the emulation probe command line mode commands enter:
? *
To get help on an individual command enter
? <command name>
Examples
? cf
? cf speed
132
<Return>
Help on configuration questions
Help on configuration speed question
Emulation for the Motorola M•CORE
key a few times.