Agilent Technologies E5900B User Manual page 161

Glossary
identify logic analyzer channels. A
label consists of a name and an
associated bit or group of bits.
Link-Level Address The unique
address of the LAN interface. This
value is set at the factory and cannot
be changed. The link-level address of
a particular piece of equipment is
often printed on a label above the
LAN connector. An example of a link-
level address in hexadecimal:
0800090012AB. Also known as an
LLA, Ethernet address, hardware
address, physical address, or MAC
address.
Mainframe Logic Analyzer A logic
analyzer that resides on one or more
board assemblies installed in a 16500,
1660-series, or 16600/700-series
mainframe.
Male-to-male Header A board
assembly that makes point-to-point
connections between the female pins
of a flexible adapter or transition
board and the female pins of an
analysis probe.
MICTOR Connector A high-density
matched impedance connector
manufactured by AMP Corporation.
High-density adapter cables can be
used to connect the logic analyzer to
MICTOR connectors on the target
system.
Emulation for the Motorola M•CORE
Monitor, In See Background
Debug Monitor.
Pod A collection of logic analyzer
channels associated with a single
cable and connector.
Preprocessor See Analysis Probe.
Preprocessor Interface See
Analysis Probe.
Probe Adapter See Elastomeric
Probe Adapter.
Processor Probe See Emulation
Probe.
Run Control Probe See
Emulation Probe and Emulation
Module.
Setup Assistant Wizard software
program which guides a user through
the process of connecting and
configuring a logic analyzer to make
measurements on a specific
microprocessor. The setup assistant
icon is located in the main system
window.
Shunt Connector. See Jumper.
Solution A set of tools for debugging
your target system. A solution
includes probing, inverse assembly,
the B4620B Source Correlation Tool
161