5 Install the emulation module.
6 Connect the cable and re-install the screws.
NOTE:
7 Reinstall the bottom cover, then turn the frame right-side-up.
8 Plug in the power cord, reconnect the other cables, and turn on the
Installing the Emulation Module
The 16700B-series logic analysis system (which is shown here) has one
available connector. If you have a 16700A-series logic analysis system, you
may connect the cable to either of the two connectors.
logic analysis system.
The new emulation module will be shown as an "E5901B Emulation Module" in
the system window.
44
Emulation for the Motorola M•CORE