Agilent Technologies E5900B User Manual page 114

Installing an Agilent E5902B Emulation Migration
8 Reinstall the cover on the emulation probe:
a Slide the top cover into place.
b Assemble the new front panel.
c Attach the front panel using the 2 screws and 2 nuts.
9 Connect the LAN cable, module/probe interconnect cable (if you will
be using the emulation probe with an emulation module), and the LAN
cable to the emulation probe. Do not connect a target cable yet.
10 Turn on power to the emulation probe.
11 Update the emulation probe's firmware.
See Chapter 10, "Updating Firmware," beginning on page 103 for instructions
on how to update firmware.
12 Run the performance verification test.
See page 151 for instructions on testing the emulation probe.
13 Connect the emulation probe to your target system.
See Chapter 6, "Connecting the Emulation Probe to Your Target System,"
beginning on page 57, and your emulation or solution User's Guide for
instructions on how to make this connection.
114 Emulation for the Motorola M•CORE