Wakeup Protocol Registers - Renesas IDT 89HPES4T4 User Manual

IDT Configuration Registers
Notes
PES4T4 User Manual
SWTOCNT - Switch Time-Out Count (0x4EC)
Bit Field
Type
Field Name
7:0 PTLPTOC RCW
15:8 NPTLPTOC RCW
24:16 CTLPTOC RCW
31:25 Reserved RO

Wakeup Protocol Registers

WAKEUPCNTL - Wakeup Protocol Control Register (0x5CC)
Bit Field
Type
Field Name
0 WAKEEN RWS
1 BCONEN RWS
31:2 Reserved RO
Default
Value
0x0 Posted TLP Time-Out Count. This field is incremented
Sticky each time a TLP is discarded from the port's IPQ posted
queue because of a time-out.
This counter saturates at its maximum value.
Reading this field causes it to be cleared.
0x0 Non-Posted TLP Time-Out Count. This field is incremented
Sticky each time a TLP is discarded from the port's IPQ non-posted
queue because of a time-out.
This counter saturates at its maximum value.
Reading this field causes it to be cleared.
0x0 Completion TLP Time-Out Count. This field is incremented
Sticky each time a TLP is discarded from the port's IPQ completion
queue because of a time-out.
This counter saturates at its maximum value.
Reading this field causes it to be cleared.
0x0 Reserved field.
Default
Value
0x1 Wake Signal Enable. This field is used to enable or disable
FRSticky the WAKEN signal.
0x0 - (disable) Wake Signal is disabled
0x1 - (enable) Wake Signal is enabled
0x1 Beacon Enable. This field is used to enable or disable the
FRSticky in-band Beacon signaling.
0x0 - (disable) Beacon signaling is disabled
0x1 - (enable) Beacon signaling is enabled
0x0 Reserved field.
9 - 63
Description
Description
February 1, 2011