Related Manuals for Teltonika FMC225
Summary of Contents for Teltonika FMC225
- Page 1 FMC225 WATERPROOF LTE CAT 1 TERMINAL WITH RS485/RS232 INTERFACES AND BACKUP BATTERY Quick Manual v1.6...
-
Page 2: Table Of Contents
Mounting recommendations with U-type cable ............................13 Basic characteristics ......................................14 LED indications ......................................... 14 Electrical characteristics ....................................17 Safety information ......................................19 Certification and Approvals .................................... 20 Warranty ........................................... 21 Warranty disclaimer ......................................21 Quick Manual v1.6 // FMC225... -
Page 3: Know Your Device
KNOW YOUR DEVICE TOP VIEW BOTTOM VIEW (WITHOUT COVER) TOP VIEW (WITHOUT COVER) STATUS SOCKET GNSS BATTERY DUAL SIM NAVIGATE ANTENNA SOCKET SLOT Quick Manual v1.6 // FMC225... -
Page 4: Pinout
1. Open collector output. Max. 0,5 A DC RS485 – A Signal A wire for RS485 RS485 – B Signal B wire for RS485 1WIRE DATA Data for 1–Wire devices. INPUT 5 RX EXT (LVCAN - RX). Quick Manual v1.6 // FMC225... -
Page 5: Wiring Scheme
IRIDIUM EDGE ® RS232-TX RS485-B RS232-RX RS485-A BUFFERED MULTIPLE RS485 TRANSPARENT AIN1/DIN2 DOUT1 FUEL GAUGE LLS SENSORS MODE +10...30 V DC GARMIN ANALOG RS232 POWER SUPPLY STARTER LLS SENSOR LLS SENSOR 10 - 30V DC BUZZER Quick Manual v1.6 // FMC225... -
Page 6: Set Up Your Device
IP67 1 Page 7, "PC Connection protection. (Windows) Quick Manual v1.6 // FMC225... -
Page 7: Pc Connection (Windows)
PC CONNECTION (WINDOWS) Power-up FMC225 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications ”. Connect device to computer using Micro-USB cable or Bluetooth connection: • Using Micro-USB cable •... -
Page 8: Configuration
CONFIGURATION At first FMC225 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed. - Page 9 Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMC225 configuration using Configurator can be found in our Wiki wiki.teltonika-gps.com/view/FMC225_Status_info wiki.teltonika-gps.com/view/FMC225_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMC225_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMC225_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMC225_Status_info#Maintenance...
-
Page 10: Quick Sms Configuration
2003 – APN password (if there are no APN password, empty field should be left) SERVER SETTINGS: 2004 – Domain 2005 – Port 2006 – Data sending protocol (0 – TCP, 1 – UDP) Quick Manual v1.6 // FMC225... - Page 11 If device has made a stationary and record ignition is off After successful SMS configuration, FMC225 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator...
-
Page 12: Mounting Recommendations
If the wire is fixed with the bolt, the loop must be connected to the end of the wire. • For better contact scrub paint from the spot where loop is going to be connected. Quick Manual v1.6 // FMC225... -
Page 13: Mounting Recommendations With U-Type Cable
Device power wire is designed to be directly connected to the positive terminal fastener of the vehicle battery. CONNECTING GROUND WIRE Device ground wire is designed to be directly connected to the negative terminal fastener of the vehicle battery. Quick Manual v1.6 // FMC225... -
Page 14: Basic Characteristics
< 35 s Blinking fast for a CELLUAR Modem activity short time Technology LTE Cat 1, GSM Device is not working or Device is in boot mode FMC225-MBIB0: GSM: B2/B3/B5/B8 2G bands FMC225-MCIB0: GSM: B2/B3/B5/B8 Quick Manual v1.6 // FMC225... - Page 15 10 – 30 V DC with overvoltage Input voltage range CAN Adapter inputs protection 1-Wire 170 mAh Li-Ion battery 3.7 V (0.63 Back-up battery RS232 Internal Fuse 3 A, 125 V RS485 wiki.teltonika-gps.com/view/FMC225_Sleep_modes 1 wiki.teltonika-gps.com/view/How_to_connect_Bluetooth_Hands_Free_ 2 adapter_to_FMB_device wiki.teltonika-gps.com/view/How_to_connect_OBD_II_Bluetooth_ 3 Dongle_to_FMB_device Quick Manual v1.6 // FMC225...
- Page 16 FMBT mobile application battery) (Configuration) Storage temperature Configuration, Events, DOUT control, -20 °C to +45 °C (with battery) Debug Operating humidity 5% to 95% non-condensing wiki.teltonika-gps.com/view/FMC225_Features_settings 4 wiki.teltonika-gps.com/view/FMC225_Sleep_modes 5 Ingress Protection IP67 wiki.teltonika-gps.com/view/FOTA_WEB Rating wiki.teltonika-gps.com/view/Teltonika_Configurator 7 Quick Manual v1.6 // FMC225...
-
Page 17: Electrical Characteristics
Drain current (Digital µA Output OFF) Drain current (Digital Output ON, Recommended Operating Conditions) Static Drain-Source resistance (Digital mΩ Output ON) DIGITAL INPUT Input resistance (DIN1) kΩ Input resistance (DIN2) kΩ Input voltage (Recommended Operating Conditions) Quick Manual v1.6 // FMC225... - Page 18 V, Range 1 Short circuit current (Uout = 0) Measurement error on 0.33 30 V, Range 1 Additional error on 30 V, Range 1 Input Voltage (Recommended Operating Conditions), Range 2 Input resistance, kΩ Range 2 Quick Manual v1.6 // FMC225...
-
Page 19: Safety Information
DO NOT touch the device before unplugging the power supply. This message contains information on how to operate FMC225 All wireless data transferring devices produce safely. By following these requirements and recommendations, interference that may affect other devices which are you will avoid dangerous situations. -
Page 20: Certification And Approvals
– General rules for use of the mark provides general requirements for the All newest certificates may be found in our Wiki use of the RCM including location of the marking on the equipment and its dimensional requirements. wiki.teltonika-gps.com/view/FMC225_Certification_%26_Approvals Quick Manual v1.6 // FMC225... -
Page 21: Warranty
Warranty does not apply to any consequential damages. • Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. • More information on what is RMA wiki.teltonika-gps.com/view/RMA_guidelines Quick Manual v1.6 // FMC225...