Change-Over Button And F Button (Standard Settings) - KERN FCB 6K-5 Operating Instructions Manual

9.5 Change-over button and F button (standard settings)

The change-over button
The following functions are set as per standard (<default>) in the different
weighing applications:
Short key pressing
➢ When pressed for first time:
Weih
➢ Switch-over between the
➢ When pressed for first time:
count
➢ Switch-over between the
check ➢ When pressed for first time:
➢ Switch-over between the
Short key pressing
➢ Open PRE-TARE settings
Weih
➢ Setting the reference quantity
count
➢ Open settings for check-
check
For more setting options please see the setup menu under < buttons >,
see chap. 14.3.1.
The standard settings (<default>) for the <Weighing> application are described
below.
TFCB-A-BA-def-2312
and the F button can be allocated with different functions.
Setting weighing unit
weighing units
Setting the reference quantity
weighing units
Setting weighing unit
weighing units
weighing
Long key pressing
➢ Display gross weight value
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
Long key pressing
➢ Carry out Data-Hold function
No function assigned
➢ Open settings for target weighing
25