Entering The Known Tare In The Numerical Form; Data-Hold Function - KERN PCJ Series Operating Instructions Manual

11.2.2 Entering the known tare in the numerical form

< Ptare >  < manuAl >

The entered tare value will be used until you enter a new one. To delete it,
enter a zero value or confirm the menu item <clear>, pressing ➔.

11.3 Data-hold function

TPCJ-BA-e-2310
 Display the <Ptare> menu setting and confirm, pressing
➔.
 Use the navigation buttons  to choose the setting <ma-
nuel> and confirm by ➔-button.
 Enter the known tare value; for introducing the numerical
value see chapter 0, the active item is blinking.
 The entered weight will be saved as tare; <NET> and
<PTARE> symbols will be shown and tare weight with a
negative symbol will be displayed.
 Place a filled weighing container.
 Wait until the stabilization indicator is displayed (
 Read out the net weight.
 Choose the menu item <hold>.
 Place the weighed material.
 Confirm by ➔-button.
 The first stable weight value is held symbolized by [HOLD]
in the upper edge of the display. After unloading, the value
is held in the display for another 10 s.
).
35