Display Gross Weight Value; Open Pre-Tare Settings; Carry Out Data-Hold Function - KERN FCB Operating Instructions Manual

Enable another unit:
For the required settings of an application unit (%, FFA) selection, please see
chap. 11.4.2 and 11.4.3.

9.5.2 Display gross weight value

As per standard the change-over button
gross weight value by long-time pressing.


9.5.3 Open PRE-Tare settings

As per standard the F-key is set so that the menu setting < Ptare> is invoked by
pressing the key shortly. Further settings, see chap. 11.2.

9.5.4 Carry out Data-Hold function

As per standard the F-key is set so that the Data-Hold function < hold> is exe-
cuted by pressing the key for a long time, see chap. 11.3.
28
 Select menu setting < unit> and confirm on ➔
button.
 Wait until the display flashes.
 Use the navigation keys  to select the weighing
unit and confirm on ➔ button.
is set so that is it possible to display the

Keep the button pressed until the display
shows the gross weight value.
After releasing the button, the gross weight value
will be kept in the display for a short time.
TFCB-A_TFCB-B-BA-def-2313