Manual Totalizing - KERN EOC 6K-3 Operating Manual

7.9 Manual totalizing

With this function the individual weighing values are added into the summation
memory by pressing
• Menu setting:
„P2 COM"  „MODE"  „PR2", see chap. 8.2
• The totalizing function is not active when the weight is under 20d.
Add up:
Place load A.
Wait until the stability display
. „ACC 1" will be displayed shortly, then the
weighing value will be displayed. The weight value will be
saved and printed if an optional printer is connected. The
symbol for Total will be displayed.
Remove the load. More loads can only be added when
the display ≤ zero.
Place load B.
Wait until the stability display appears, then press
„ACC 2" is shortly displayed. The weight value will be
added into the summation memory and printed if
necessary.
Add more loads as described before.
Please note that the weighing system must be unloaded
between the individual weighing procedures.
This process may be repeated 99 times or till such time
as the capacity of the weighing system has been
exhausted.
34
and edited, when an optional printer is connected.
appears, then press
(example)
.
(example)
EOC-BA-e-1711