Table of Contents
Advertisement
8.10
Other functions
8.10.1 Zero-Tracking
Zero tracking compensates automatically small weight variations, caused e.g. by dirt
or temperature changes. The balance continues to display 0.
If small quantities are removed from or added to the load, this function, however, can
cause a wrong weighing result being displayed (e.g. by slowly draining liquids). In this
case the function should be disabled.
The Zero tracking can be enabled or disabled in the setup menu.
Information about opening the menu and the operation can be found in
chapter „Menu"
8.10.2 Automatic switch-off function
When switch-off function enabled: The balance switches off, if the keyboard is not
operated and if within the last 3.5 minutes no weight change has been measured.
For use, the balance must be switched-on again.
The automatic switch-off function can be enabled and disabled in the
setup menu. Information about opening the menu and the operation can
be found in chapter „Menu"
CH-BA-e-2440
Operation
en | 33
Advertisement
Table of Contents
