8 Basic Operation
8.1 Start-up
Press
, the appliance will carry out a self-test. As soon as the weight display
appears, the instrument will be ready to weigh.
8.2 Switching Off
Press the
Press and hold
▪ stand-by if powered by power adaptor,
▪ power off if powered by rechargeable battery.
8.3 Zeroing
Resetting to zero corrects the influence of light soiling on the weighing plate. The unit
is equipped with an automatic zero setting function. Therefore the unit can be reset to
zero at any time as follows:
To unload the weighing system
Press
, zero display as well as indicator >0< will appear.
8.4 Simple weighing
Place goods to be weighed.
Wait for stability display
Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum load is indicated by the display
acoustic signal. Unload weighing system or reduce preload.
TKFC-TM-A-BA_IA-e-2212
button will toggle the back light on/off
to switch to
.
and an
23