Unpacking And Checking; Assembling, Installation And Levelling - KERN CDS Series Operating Instructions Manual

7.2 Unpacking and checking

Remove device and accessories from packaging, remove packaging material and
install the device at the planned workplace. Check if that there has been no damage
and that all items of delivery scope are present.
Scope of delivery / serial accessories:
• Balance, see chap. 3.1
• Mains adapter
• Operating instructions
• Protective hood

7.3 Assembling, Installation and Levelling

 Remove transportation lock on the lower side of the balance.
 Install weighing plate and wind shield if necessary.
 Ensure that the balance is installed in a level position.
 Level balance with foot screws until the air bubble of the water balance is in the
prescribed circle.
 Check levelling regularly
14 TCDS-A-BA-def-2311