Setup Menu; Setup Menu List - MIMAKI UJV100-160 Operation Manual

Chapter 3 Settings

3.1 Setup Menu

Print conditions (settings 1 to 4) can be saved in advance for specific media.
l Setup menu screen
LOCAL
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
SETUP1 1/3
FEED COMP.
DROP.POScorrect
AUTO-CORRECTION
LOGICAL SEEK
HOST
OVER PRINT
HOST
<< >>

Setup Menu List

The user can select to prioritize the settings on the machine or the settings on the PC. Setting individual
menus to "HOST" prioritizes PC settings. To prioritize settings for this machine, select a setting other than
"HOST".
• For more information on how to specify RIP software, refer to the RIP software operating
manual.
Item
Feed Comp. -9999 to 0 to
Drop.PosCorrect -40.0 to 0 to
Auto Correct
Feed Comp.
Drop.PosCorrect
Logical Seek HOST/OFF/
MENU
SETUP
MAINTENANCE
MACHINE SETUP
NOZZLE CHECK
INFORMATION
SETUP1 2/3
MARGIN/LEFT
> HOST
MARGIN/RIGHT
> HOST
VACUUM FAN
> HOST
FEED SPEED
100％
AUTO CLEANING
<< >>
Setting
*1 *2
- Corrects the media feed amount.
9999
• Print a pattern and enter the correction amount.
- Corrects the drop position for bi-directional printing.
40.0
• Print a pattern and enter the correction amount.
- - Detects a correction pattern with the sensor and automatically
corrects the drop position.
- -
• Check to confirm that the media does not lift up.
- -
• Load white and clean media.
• Synthetic paper or cloth media may not be detected.
• Do not send the RIP data from the PC during pattern printing.
• If automatic correction is unsuccessful, correct the position
manually. [MENU] > [SETUP] > [Feed Comp.] or
[Drop.PosCorrect]
OFF Sets the range of carriage movement.
ON
SETUP
●SETUP1
>
○SETUP2
>
○SETUP3
>
○SETUP4
>
○Temporary
>
SETUP1 3/3
UV MODE
OFF
MAPS4
RESET SETTIG
>
<< >>
Details
72
>
>
Select "SETUP 1 to 3" or "Tempotary"
>
and then press the key
>
>
>
>