Ink Replacement Method; When Ink Near End Is Displayed; When Ink End Is Displayed - MIMAKI UJV100-160 Operation Manual

1.5 Ink Replacement Method

When Ink Near End is Displayed

Ink levels are low. We recommend replacing with new Ink bottle as soon as possible. Although printing is
possible, ink may run out during printing.
To check which Ink bottle needs to be replaced, press the [ENTER] key in LOCAL mode screen.
"Displaying Machine Information (Local Guidance)"(P. 28)

When Ink End is Displayed

The ink has run out. Replace with new Ink bottle.
Thoroughly read the following and make sure you understand its contents.
"Ink or any Other Liquid Used with the Machine"(P. 11)
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
l Ink Replacement Process
* Mount a new ink bottle, clear the error (ink end or ink near-end), and
register the ink IC chip.
l Removing Ink Bottles
1
Rotate the lever on the tank section from left to right.
• Never attempt to rotate the ink bottles. Doing so may result in leaking ink.
Mount a new ink bottle.
Register the ink IC chip provided with the ink bottle on this machine.
Chapter 1 Before Using This Product
39
1