Matrix Telecom SIMADO GBR42 System Manual page 99

Use following command to allow/deny the Incoming Calls for Mobile
Port:
308-Mobile Port-Code-#*
Where,
Mobile Port is from 1 to 4.
Code Meaning
0 Deny
1 Allow
By default = 1 (Allow).
Note:
• Port must be 'enabled' to allow/deny IC Calls.
Step 7
Use following command for selection of Mobile Frequency Band on
Mobile Port:
309-Mobile Port-Mobile Frequency Band
Where,
Mobile Port is from 1 to 4.
Mobile Frequency Band
1
2
3
4
5
By default, Mobile Frequency Band = 900 + 1800.
For example, program 850 + 1900 GSM frequency band for countries
which support both 850 and 1900 MHz frequencies for GSM network.
Step 8
Signal Strength
• Some times the Mobile port can not place the call on GSM network
due to absence of signal or weak signal. Hence GBR42 supports
to get the information about the Signal Strength when requested
only from the BRI-NT Port using ISDN Phone or PBX connected to
it. Using command from all the other ports like, Mobile or BRI-TE
the user will get error tone.
SIMADO GBR42 V1 System Manual
Meaning
900
1800
1900
850 + 1900
900 + 1800
Matrix
99