Matrix Telecom SIMADO GBR42 System Manual page 144

Matrix
109.
Step 2: To configure the GBR42 to strip the '+' or not from the
received calling party number using command 216.
Step 3: To program the Replacement String which should be used to
replace '+' in the CLI using command 217.
Step 4: Program to use # as end of dialing digit using command 141.
Step 1
Use following command to select A-law and mu-law for the Gateway:
109-PCM Selection-#*
Where,
PCM Selection
1
2
By default, PCM Selection is A-Law.
Step 2
Replacing '+'
Use following command, to configure the GBR42 to strip the '+' or not
from the received calling party number:
216-Code-#*
Where,
Code Meaning
0 Do not make any modification in received CLI.
1 Replace '+' from the CLI with the programmed
replacement string.
By default the option is 'Do not make any modification in
received CLI'.
Step 3:
Replacement String
Use following command to program the Replacement String which
should be used to replace '+' in the CLI:
217-Replacement String-#*
Where,
Replacement String = Digits from 0 to 9 and Blank, with 6 digits max.
By default, 'Replacement string' is Blank.
144
Meaning
A-Law
Mu-Law
SIMADO GBR42 V1 System Manual