Matrix Telecom SIMADO GBR42 System Manual page 75

Step 2
Use following command to program the routing group in the dialed
number string table:
152-Dialed Number String Table Index-Routing Group-#*
Where,
Dialed Number String Table Index is from 001 to 500.
Routing Group is from 01 to 16.
By default, Routing Group is 03 in the dialed number string table.
Step 3
Use following command to program the "Change Called Number?"
flag at an index into the dialed number based routing table:
153-Dialed Number String Table Index-Code-#*
Where,
Dialed Number String Table Index = Index of Dialed Number table for
which the "Change Called Number?" flag is to be set.
Index is from 001 to 500.
Code Meaning
0 Donot change called number
1 Change called number
By default, Code = 0.
Step 4
Use following command to program new called number at an index in
the dialed number table:
154-Dialed Number String Table Index-New Called Number-#*
Where,
Index of Dialed Number table is from 001 to 500.
New Called Number is the number of max. 16 digit, which will be
replaced by the called number available, if any.
By default, All numbers are blank.
Use following command to clear the destination number string at an
Index in the dialed based routing table:
154-Dialed Number Based Routing Table Index-#*
Step 5
Use following command to clear the entire dialed number string table:
155-#*
SIMADO GBR42 V1 System Manual
Matrix
75