Matrix Telecom SIMADO GBR42 System Manual page 50

Matrix
• Whereas, if the caller is connected to the feature tone generator,
the caller gets feature tone (which nearly simulates call routing
tone of the ISDN network) till further call progress message is
received from the ISDN network.
For NT Port
• When NT is terminating port the call progress tones generated by
SIMADO GBR42 shall be played as per state of the call.
How to program?
Step 1: To set call proceeding tone for mobile port using command
307.
Step 2: To programming type of call proceeding tone on TE port using
command 408.
Step 1
Use following command to set call proceeding tone for mobile port:
307-Mobile Port-Code-#*
Where,
Mobile Port is from 1 to 4.
Code Meaning
1 SIMADO Tone
2 GSM Network Tones
By default, Call Proceeding Tone is '2'.
Step 2
Use following command to program type of call proceeding tone on
TE port:
408-TE Port-Code-#*
Where,
TE Port is from 1 to 2.
Code Meaning
1 SIMADO Tone
2 ISDN Network Tone
By default, Call Proceeding Tone Type is 2.
50 SIMADO GBR42 V1 System Manual