Matrix Telecom SIMADO GBR42 System Manual page 61

Step 2
Use following command to program the routing group for a CLI
number:
132-CLI Routing Table Index-Routing Group-#*
Where,
CLI Table Routing Index is from 001 to 200. In this case, Routing
Group at Index 001 will specify which routing group is to be used
when CLI does not match with CLI table.
Routing Group is from 01 to 16.
By default, Routing Group is 01.
Step 3
Use following command to program the change called number flag:
133-CLI Routing Index-Code-#*
Where,
CLI Routing Index is from 002 to 200.
Code Meaning
0 Do not change called number
1 Change called number
By default, Change Called Number Flag is 1.
• If Code is 0 then call will be routed with the destination number
dialed by the caller or the fixed destination number programmed. If
fixed destination number is not programmed, then the destination
number dialed by the system will be 'Blank'.
• If code is 1 then call will be routed with the destination
programmed in the calling party number routing table entry.
Step 4
Use following command to program the new called number at an
index in the CLI routing table:
134-CLI Routing Table Index-New Called Number-#*
Where,
CLI Routing Table Index is from 001 to 200.
New Called Number is of 16 digits. Number string ranges from 0-9, #
and *.
By default, New Called Number is Blank.
SIMADO GBR42 V1 System Manual
Matrix
61