Day Meaning
1
Sunday
2
Monday
3
Tuesday
4
Wednesday
5
Thursday
6
Friday
7
Saturday
By default, Day is 1.
Step 3
Use following command to program the current time:
103-HH-MM-SS-#*
Where,
HH is from 00 to 23 (leading zero is must in case of single digit).
MM is from 00 to 59 (leading zero is must in case of single digit).
SS is from 00 to 59 (leading zero is must in case of single digit).
By default, Time is 00:00:00.
Example:
An important application of RTC is for DST. User should set the
system 'Time', 'Date' and 'Day' first using RTC, as per the current
values, before programming the system for daylight saving time
feature while installed in a country which observes DST.
Important Points:
• RTC parameters will not get defaulted, by issuing default GBR42
command.
• This will be defaulted only by loading new version and revision of
the software.
Relevant Topic:
1. Daylight Saving Time Adjustment 67
SIMADO GBR42 V1 System Manual
=X=X=
Matrix
117
Need help?
Do you have a question about the SIMADO GBR42 and is the answer not in the manual?