Matrix Telecom SIMADO GBR42 System Manual page 137

Important Points:
• If PIN of the SIM is changed to more than 4 digits in the SIMADO
GBR42, it will be possible that if such SIM is inserted in the Mobile
Set, the Mobile Set will not allow it, because some Mobile Sets
support PIN length of four digits only. In such condition the user
should first change the PIN using SIMADO GBR42 to four digits
and then insert it into the Mobile Set.
• Ensure that 'SIM PIN at Power ON' in SIM Card is enabled. Else
SIM PIN will not be changed using this command.
• SIM PIN number does not get default when the user gives the
command to default the SIMADO GBR42 parameters. PIN values
get default to 1234, only when the Version or Revision number of
the software of the SIMADO GBR42 is changed.
Relevant Topic:
1. Mobile Port Parameters
SIMADO GBR42 V1 System Manual
96
=X=X=
Matrix
137