Dialed Number Based Routing
What's this?
SIMADO GBR42, has the facility to initiate the call from a specific port
based on the number string dialed. This is called Dialed Number
Based Routing. For this, a separate routing group is assigned for a
specific number string and the Member of the group will be the ports
for dialing the Number.
How it works?
• The routing group to be used for placing the call is determined from
the number dialed.
• This logic is used when routing type is programmed as dialed
number based.
• The dialed number string is compared with the "Dialed Number
String Table" and if match is found then the call is routed on the
routing group assigned to that number string.
• If matching entry is not found in the dialed number string table then
the call is routed as per routing group of first index of table.
• This routing group can be formed such that number can be dialed
out from the port, for which call cost will be minimum. Different
prefix can be programmed for the required numbers to be dialed
out from the port which will cost minimum compared to other ports
in the routing group assigned to that prefix number string.
• Thus Least Cost Routing (LCR) can be implemented by suitable
programming of the table.
• The dialed number string table contains maximum 500 entries.
• If required, user can program the number string using following
Codes for the Special digits:
SIMADO GBR42 V1 System Manual
Matrix
73
Need help?
Do you have a question about the SIMADO GBR42 and is the answer not in the manual?